The Welch Allyn Spot Vital Signs monitor provides vital signs in seconds with hospital-grade technology that’s easy to use, accurate and affordable. Ships standard with one Adult and one Large Adult Cuff. Spot Monitor Cleaning requirements This section presents procedures for cleaning the Connex Spot Monitor (including the monitor, stand, APM work surface, accessories, and accessory basket and bins). Welch Allyn has validated these instructions to be capable of preparing your Connex Spot Monitor devices and above accessories for re-use.
- Welch Allyn Vital Signs Monitor Manual
- Welch Allyn Spot Vital Signs
- Welch Allyn Lxi Spot Vital Signs Monitor
- Welch Allyn Vital Spot Monitor
- Welch Allyn Spot Vital Signs Troubleshooting
1
Quick Overview. The Connex® Spot Monitor features an easy-to-use, vivid touchscreen display and provides accurate vital signs measurement including blood pressure averaging, spot checking, interval monitoring and custom scoring across patient populations. Page 54: Wireless Radio Test Welch Allyn Spot Vital Signs LXi Wireless Radio Test Connect a null modem to Spot Vital Signs LXi Port 1. Connect a serial cable to the PC and the null modem. Connect the other null modem to Spot Vital Signs LXi Port 2. Connect the Wireless Radio to the null modem. The Welch Allyn Spot Vital Signs is intended for measurement of blood pressure, pulse rate, temperature, and oxygen saturation (SpO2) of adult and pediatric patients. The device is not designed, sold, nor intended for use except as indicated. † THE WELCH ALLYN SPOT VITAL SIGNS IS NOT INTENDED FOR USE ON NEONATAL PATIENTS. The Connex® Vital Signs Monitor is an intuitive, touchscreen monitor featuring bright, vivid colors for improved workflows and training. Adaptable for most low-acuity healthcare environments and clinical workflows, it can measure pulse oximetry, non-invasive blood pressure (NIBP), temperature, EtCo2, respiration, heart activity and more.
English
Set the date and time
Welch Allyn Vital Signs Monitor Manual
After recharging a dead battery or after disconnecting the battery for a few minutes, you
must program the date and time screen.
You can change several device operating parameters in the Internal Configuration Mode.
When changed, these settings become the default power-up settings. You will also see
non-changeable device configurations for technical service purposes.
To enter the Internal Configuration Mode:
1.
Turn the Spot Vital Signs off (
).
2.
Press and hold the Blood Pressure Start/Stop (
Welch Allyn Spot Vital Signs
) and Power (
) buttons. The
device enters the Internal Configuration Mode and displays the software version.
If the device displays E38, press the Next Patient/Clear/Cancel (
) button to
cancel the error.
3.
Press the Mode (
) button to cycle through the Internal Configuration menu until
you see the date option displayed on the screen.
4.
Use the Next Patient/Clear/Cancel (
) or Blood Pressure Start/Stop (
Welch Allyn Lxi Spot Vital Signs Monitor
)
buttons to change the default setting.
Welch Allyn Vital Spot Monitor
- Chinese
- 简体中文