Blader door alle pagina's van de handleiding Cateye TOMO CC-ST200, vertaal naar andere talen. In elke handleiding vindt u meestal een bouwschema Cateye TOMO CC-ST200, evenals de onderhoudstips Cateye TOMO CC-ST200. U leert ook hoe het apparaat Cateye TOMO.
Find the personal fitness user manual you need at ManualsOnline. Automotive; Baby Care; Car Audio & Video; Cell Phone. Cateye Bicycle tomo xc cc-st200. Can i buy the electrical lead for the EC-1600. Cateye Bicycle MODEL EC-1600. Please help find the manual for this Cateye Bicycle Products Bicycle. Cateye Bicycle None. Related Manuals for Cateye Tomo CC ST-200. Bicycle Accessories Cateye Padrone Smart + CC-SC100B Online Manual 154 pages. Bicycle Accessories Cateye Padrone Smart+ CC-SC100B Quick Setup Manual 9 pages. Bicycle Accessories Cateye CC-ST250 Manual 2 pages. Feb 06, 2016 CATEYE TOMO. Model CC-ST200. A New Horizon For Magnesium Bikes? Super Magnesium Explained With The Vaast Allite A1 Gravel Bike.
Setting Values Cross Reference Table
(The tire size is marked on both sides of the tire.)
U.S. Pat. Nos. 4636769/4642606/5236759/5226340
and Design Patented
Copyright© 1999 CATEYE Co., Ltd.
CCMSTxch1-991124 Printed in Malaysia 066600035
3
CATEYE TOMO XC
CYCLOCOMPUTER
Model CC-ST200
[with Heavy Duty Wire]
magnet
sporkes
bracket
rubber pad
Fig.1
Fig.8
MOUNTING TO BIKE
Fig.9
lever
#169-9731
Heavy Duty Wire and Bracket Sensor Kit
#169-9771
Bracket Sensor Kit for Extra Large Fork
#169-6168
Bracket Sensor Kit for Aero Bar
#169-6167
Center Mount Bracket Kit
#169-6169
Stem Mount Bracket Kit
#169-9750
#169-9751
Attachment Kit (For Heavy Duty Wire)
Attachment Kit (For TOMO XC)
#166-5120
#169-6180
Wheel Magnet
Lithium Battery(CR1620)
SPECIFICATIONS
Controller ----------------------------------- 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator)
Display -------------------------------------- Liquid Crystal Display
Sensor -------------------------------------- No Contact Magnetic Sensor
Operating Temperature Range ------- 0
°
C - 40
°
C (32
°
F - 104
°
F)
Applicable Cycle Sizes ------------------ 130cm - 229cm
The length of the wire ------------------- 70cm
Applicable Fork Diameter -------------- 11ш - 40ш (S:11 - 26ø L:21 - 40ø)
Power Supply ----------------------------- Lithium Battery (CR1620 or CR1616) x 1
Battery Life --------------------------------- Approx. 3 years(The life of the first factory-loaded battery may
be shorter than this period.)
Dimension/Weight ------------------------ 1-15/16' x 1-25/32' x 5/8' (49 x 45 x 16 mm) / 0.74 oz (21 g)
* The specifications and design are subject to change without notice.
LIMITED WARRANTY
1-Year Warranty for Main Unit Only
(Accessories/Attachments and Battery Consumption excluded)
If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of
charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it carefully
and remember to enclose the warranty certificate with instruction for repair. Please write or type your
name and address clearly on the warranty certificate. Insurance, handling and transportation charges
to our service shall be borne by person desiring service.
(Address for service)
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Attn.: CAT EYE Customer Service Section
Service & Research Address for United States Consumers:
CAT EYE Service & Research Center
1705 14th St. 115 Boulder, CO 80302
Phone : 303-443-4595
Toll Free: 800-5CATEYE
Fax
: 303-473-0006
e-mail: CatEyeUSA@aol.com
CO.,LTD.
E
Slide the main unit onto the bracket from
front until it clicks into position. To remove
it, pull it off forward while pushing down the
lever. (Fig.9)
• The spokes must run correctly through the
inside the magnet as in fig.1.
• Attach the sensor with Sensor Bands-A-B to
the right fork. Choose a band that fits the fork
diameter (S size for up to 24ø, L for
oversize). If the front fork is thick, use the
longer screw.
1. Insert the band-B into the slit of the band-
A, and put the rubber pad inside of the
band-A(fig. 2). Adjust the length in order
that the screw-fastening part of the bands
are parallel when mounted to the fork(fig.
3). *To pull out the band B from band A,
tug strongly.
2. Mount the adjusted bands to the fork along
with the sensor, by temporarily tightening
the screw(fig. 4).
3. Align the magnet's center and the sensor's
marking line(fig. 5), and make sure of
2mm clearance between the magnet and
sensor (fig. 6). Then tighten the screw
securely. Cut the excess of the band-B
with a nipper or the like.
• Secure the wire with nylon ties as shown in
fig. 7. Wind the wire round the outer cable
and wrap these wires with the spiral tube.
Adjust the length of the wire. Loosen the wire
in the area marked with the arrow so that the
wire does not hinder handlebar operation.
• Use either 1mm- or 2 mm-thick pads if
necessary, according to handlebar diameter.
Attach the bracket close to the handlebar
stem (fig. 8).
• Slide main unit onto the bracket from front
until it clicks into position. To remove, pull it
off forward while pushing down the lever. (fig.
9)
•Test
Mount main unit. If main display does not show
any figures, press either M button or S/S button
to release from power saving function. Spin the
wheel to check if sensor pulse symbol flashes.
If not, adjust relative positions of magnet and
sensor following the instructions.
TIRE SIZE
L(cm)
TIRE SIZE
L(cm)
TIRE SIZE
L(cm)
20 x 1.75
150
26 x 1.40
200
650 x 38B
211
24 x 1
175
26 x 1.50
199
700 x 18C
207
24 x 3/4 Tubular
178
26 x 1.75
202
700 x 19C
209
24 x 1-1/8 Tubular
179
26 x 1.95
205
700 x 20C
209
24 x 1-1/4
191
26 x 2.00
206
700 x 23C
210
24 x 1.75
189
26 x 2.1
207
700 x 25C
211
24 x 2.00
192
26 x 2.125
207
700 x 28C
214
24 x 2.125
196
26 x 2.35
208
700 x 30C
217
26 x 1(559mm)
191
27 x 1
215
700 x 32C
216
26 x 1(650c)
195
27 x 1-1/8
216
700C Tubular
213
26 x 1.25
195
27 x 1-1/4
216
700 x 35C
217
26 x 1-1/8 Tubular
197
27 x 1-3/8
217
700 x 38C
218
26 x 1-3/8
207
650 x 35A
209
700 x 44C
222
26 x 1-1/2
210
650 x 38A
212
nyron ties
Fig.7
outer cable
wire
spiral tube
Fig.5
markingline
of sensor
center of
magnet
sensor band B
sensor
band A
Fig.3
rubber pad
sensor band B
Fig.4
sensor band A
Fig.2
screw
magnet
sensor
Fig.6
rubber pad
parallel
sensor
about 2mm
fork
sensor band A
1. Bracket
2. Wire
3. Sensor
4. Sensor Bands-A (S)(L)
5. Sensor Bands-B
6. Magnet
7. Sensor Band Rubber Pad
8. Bracket Rubber Pad (2 pcs.)
9. Nylon Tie (3 pcs.)
10. Sensor Band Screw (S)(L)
11. Spiral Tube
MXS
ODO
DST
TM
AVS
L
OPERATING INSTRUCTIONS
AUTO (AUTOMATIC START/STOP) FUNCTION
AUTO
DST
When main unit is left without receiving any signal for 60-70 minutes
continuously, power supply is shut down and main unit will display (
) only
as the figure. By pressing M button or S/S button, or by receiving signal, this
function is released.
POWER SAVING FUNCTION
TROUBLE SHOOTING
•
The following situations do not indicate malfunction of the cyclocomputer. Check
the following before taking to repair.
* When current speed does not appear, short-circuit the contact on the back with
metal. The unit will function normally if the speed display appears.
Display response is slow.
----- Is it at a low temperature under 32
°
F(0
°
C)?
Outlook 2016 instruction manual pdf. You can try many strategies to turn the pages of eBook to improve your reading experience. Try to use the mouse if you're comfortable sitting back. Prefer to make us of arrow keys if you are leaning forwards. Check out whether you can turn the page with some arrow keys or click a specific section of the screen, apart from utilizing the mouse to manage everything.
----- It returns to normal state when temperature rises.
No display.
----- Has the Lithium Battery in the main unit worn out?
----- Replace the Lithium Battery with a new one.
Incorrect data appear.
----- Execute 'All Clear' operation.
Current speed does not appear.
----- Is there anything on the contact of the main unit or of the bracket?
----- Wipe the contact clean.
----- Is the distance between sensor and magnet too far?
----- Are the marking line of the sensor and the center of magnet matched each other?
----- Refer to 'Sensor/Magnet Mounting' and re-adjust correctly.
----- Is the wire broken?
----- Replace the Bracket & Sensor part with a new one.
Transmission signal loss in damp or wet conditions.
----- Water or condensation may collect between the bracket sensor and the computer
causing an interruption in the data transmission. Wipe the contacts with dry cloth.
Contacts can also be treated with a water repellent silicon jell from an automotive parts
or hardware store. Do not use industrial water repellent; it may damage the bracket.
When the S/S button is pressed, the unit doesn't activate or stop.
----- Is the unit in the Auto function?
----- The S/S button doesn't function in the Auto function.
MAINTENANCE/PRECAUTIONS
• Do not leave the main unit exposed to direct sunlight when the unit is not in use.
• Do not disassemble the main unit, sensor and magnet.
• Don't pay too much attention to your computer's functions while riding! Keep your eyes on
the road and duly consider to traffic safety.
• Check relative position of sensor and magnet periodically.
• For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not
apply paint thinner, benzine, or alcohol, to avoid damages on the surface.
• If there is mud, sand or the like clogs between the button and the body, the movement of
the button may be disturbed. Softly wash away such objects with water.
SPD
Current Speed
0.0(3.0) - 65 mile/h(27inch)
±
1 mile/h under31 miles/h
This is always displayed on the main display and updated once a second.
ODO
Total Distance (Odometer)
0.0 - 9999.9 mile
±
0.1 mile
This is continuously measured until battery wears down or all clear opera-
tion is done. At 10,000 miles(km), it returns to zero and counting begins
anew.
DST
Trip Distance
0.00 - 999.99 mile
±
0.01 mile
The trip distance from start to current point is displayed. With Reset opera-
tion, it returns to zero.
TM
Elapsed Time
0:00'00' - 9:59'59'
±
0.003 %
Elapsed time is measured from start to current point, in units of hours, min-
utes and seconds. At 10 hours, it returns to zero and counting begins anew.
With Reset operation, it returns to zero.
AVS
Average Speed
0.0 - 65.0mile/h
±
0.3 mile/h
The average speed from start to current point is displayed within 27 hours
46 minutes 39 seconds (99,999 seconds) or 999.99 miles (km). If either is
exceeded, (.E) is displayed and calculation ceases.
MXS
Maximum Speed
0.0(3.0) - 65 mile/h(27inch)
±
1 mile/h
With Reset operation, it returns to zero and counting begins anew.
12-hour clock time
0:00' - 11:59'
±
0.003 %
The current time is displayed by a 12-hour clock.
This function switches the main unit to start or stop automatically, in which
AUTO symbol appears on the screen, and you are free from pressing S/S
button each time.
How to switch on/off the Auto Function.
In TM, DST or AVS, this function switches on/off with each press of SET
button. When on, AUTO symbol appears. *With this function, it ceases
measuring elapsed time during a stop.
* 2 seconds may be elapsed if mount the main unit to the bracket with this
function on.
Fig.4
MEASURING AND DISPLAY FUNCTIONS
Fig.5
Fig.6
Cateye Tomo Cc-st200 Manual
Fig.7
Fig.2
Fig.3
Fig.1
BUTTON FUNCTION
• M button (Fig.1)
Changes the display in the order shown in fig. 1, and data is
displayed on the sub-display. *If held over 2 seconds, 12-hour clock
appears.
• S/S button
Starts and stops the measurement of trip distance and elapsed time.
During operation, speed scale symbol flashes. In Auto Function, this
button is invalid.
• SET Button
This is for setting the wheel circumference and clock time, switching
on/off Auto Function and to clear all present data and any
irregularity. When pressed in stop state in each mode, the following
can be revised.
• In ODO mode ------------------ Wheel circumference
• In
mode -------------------- 12-hour clock
• In TM, DST or AVS mode --- On/off the Auto function
Reset Operation: (Fig.2)
Select any mode except ODO, then press M button and S/S button
simultaneously. MXS, AVS, DST and TM will become zero. (When
done in ODO, registered wheel circumference will be displayed.)
All Clear Operation: (Fig.3)
When M button, S/S and set buttons are pressed simultaneously, all
data stored (ODO, speed scale, Wheel circumference and clock
time) is erased. All displays illuminate, then mile/h symbol
illuminates. This should only be executed after replacing battery or
when irregular display occurs due to static electricity, etc. Since all
memories are erased, set necessary data again according to 'Main
Unit Preparation'.
MAIN UNIT PREPARATION
The following must be completed before operating.
(1) How to measure wheel circumference (L) of your bike (Fig.4)
Put a mark on the tire tread and ride the bike one full wheel revolu-
tion. Mark the start and the end of the revolution on the ground and
then measure the distance between the two marks. This is your ac-
tual circumference. Or, the 'Setting Values Cross Reference Table'
tells you an approximate circumference according to tire size.
(2) Setting Speed Scale
Preform all clear operation. All displays will illuminate. Then mile/h
alone will be displayed as illustrated in fig.5. Km/h and mile/h are
alternately displayed with each press of S/S button. Press M button
to set desired speed scale. The display will change as fig. 6.
(3) Setting the wheel circumference (Fig.6)
The standard wheel circumference of 216 cm for 27' wheel is dis-
played. When using 216 cm without revision, press M button. ODO
will be displayed and 216 cm is set. For revision, press S/S button to
increase the number by one. To increase rapidly, hold down the but-
ton. When the desired number appears, press M button. ODO will be
displayed, and the desired number is set.
(4) Resetting or changing the wheel circumference
Set main unit in ODO with M button, and stop it with S/S button.
Press SET button. The stored number will flicker on the sub-display.
Revise the number as desired according to the instructions in (3).
Setting the clock time (Fig.7)
Press M button over 2 seconds to select
, and stop it with S/S
button. Then press SET button, and minutes flash. Press S/S button
to advance minutes by one. To advance rapidly, hold down the but-
ton. Set the time one or two minutes ahead of the current time. Then
press M button, and hours will flash. Use S/S button the same way.
Press SET button to complete time setting. *When you press the
SET button, the undisplayed seconds will turn to zero. For accuracy,
set by the radio time signal.
HOW TO REPLACE THE BATTERY
Turn main unit over, remove battery case cover with coin and insert
a new lithium battery properly (CR1620 or CR1616) with the (+) pole
upward (fig.8), and close the cover securely.
* Please make sure to do the All Clear operation after replacing
battery, and to set the unit again.
Reset Operation
All Clear Operation
A. Main Display (Speed)
B. Sensor Pulse Symbol
C. Mode Symbol
D. Speed Scale Symbol
E. Auto Mode Symbol
F. Sub-Display (Selected Function)
G. M (Mode) Button
H. S/S (Start/Stop) Button
I. Set Button
J. Battery Case Cover
K. Contact
DST
ODO
DST
TM
AVS
Cateye Tomo Xc Cc-st200 Instruction Manual
MXS
close
Cateye Tomo Cc-st200 Manual Cz
open
Fig.8
TOMO XC